Welcome to Squadra916

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Sign in to follow this  

Toora T932 (Monoposto) central lock wheels for Alfa Romeo 147 156 GT GTV Spider


You are looking at genuine set of Toora T932 central lock wheels. These are straight without any dents, flat spots or cracks. They've been recently refurbished, but expect some light marks on the paint. One of the wheels have tiny weld on the back side of the rim. Tested and run fine. These wheels are extremely hard to find, specifically designed for 916 series GTV/Spider.


- Set of 4 wheels
- 17 inch
- 5x98 stud
- 7J width

- Offset 57.5 / 35~ with the adaptors
- central bore 58.1mm
- 4x genuine adaptors included
- 4x genuine nuts included
- non original key for the central nut included
- Made in Italy (1998)
- Price: 700 euro











Edited by stef4oe

Share this post

Link to post
Share on other sites

Do you know the weight (in kg) of them?


Send the same in pm, too

Edited by Desame

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Similar Content

    • By WillieNillie
      Hi, i have some items for sale: i will be driving on the 10th of july down to england going through germany: hamburg, bremen, munster, dusseldorf into antwerpen, gent and finally euro tunnel to england: here is the map: https://goo.gl/maps/UkMe7YB48PDj8BJj8
      if you want any of these items for youre car and can meet me on the way i will take them with me. 
      Complete Zender pedal set with footrest
      Complete set of TS Bilstein B6 shocks (30 000 km on the front and rear) 1 rear failed and leaking and needs rebuild. the other 3 are great. 15% stiffer then stock, mono-tube design. probably the best set of shocks for the GTV. no springs or top mounts tho.
      Painted 4 pot brembo 166 calipers in anodized red - might need a respray if you're picky. with adapters in aluminium also anodized red, Mtec Brera PCD redrilled 330x28 brake disc, with Stainless Steel Brake Pipe Set - Red from alfisti Incl. German TUEV/KBA certificate all bolt ons no need for any modification. all you need are some 330 PF pads and you have the best bang for your buck brakes for you're TS.
      Retail worth: 600 euros if you where to buy this anywhere online to mix and match all these parts together.
      Pm me your offers for these items. 
      only item i will send are the zender pedals, the rest you have to meet me.

    • By kunev
      I'm selling two APEXi AVC-R (AVCR) electronic boost controllers, which I have bought second hand some time ago, but did not reach the point to use them...
      Main features are:
      two boost modes + OFF mode (boost regulated by wastegate spring) boost by gear boost by rpm with 500rpm intervals scramble boost with additional switch/button - temporary boost setting three modes of data presentation - analog, digital and graphical  
      Below one is modified in such way that cable to get out at the back of control unit instead of original at right side.
      Price for it is 220 euro.

      Other one which you can see below have also original package.
      Price for it is 250 euro

    • By Toshko
      I have for sale 18 inch genuine Toora Jetfins from GT. 8J ET32
      No welds, all straight.
      Price: 375EUR 
      Shipping to EU/UK 60-90 EUR
      Location: Varna, Bulgaria
      Contact me on: georgiev.t@abv.bg
      + 359 883361616


    • By Razorcz91
      is anybody here who would like to sell front CUP split? I will offer 300€ for it

    • By Scherste
      Up for sale is a pair 166 Brembo calipers (see pics for condition). Wanted to give them new powdercoat but there's no time... perhaps another member can enjoy them!
      They come with cnc machined adapers (unused), so you can swap the original 2.0 TS calipers just plug&play. Just some 305mm discs are needed.
      Price for complete set is 400,- €. Please ask for split! Item location is in Germany - will ship worldwide.
      Please ask when there are any questions!
      Cheers, Stefan

  • Recently Browsing   0 members

    No registered users viewing this page.